A trash pump came in for repair with the pump shaft frozen. After inspection we found that the bearings had failed due to lack of lubrication. We repaired the shaft journal areas and reassembled the pump using new bearings, gaskets, and seals.

Cox Industrial Services got an emergency call to repair a grinder pump in a problem sewage pit. Due to the emergency nature of the job we determined it would be more economical and faster to replace the pump. The new pump was modified and installed to prevent any...

Cox Industrial services was called in to replace an antiquated booster system at a 240 unit complex. We recommended and installed a new Aquavar booster system with new copper piping. The installation was coordinated so the water services were only interrupted for a...

Cox Industrial Services was called out to replace a deteriorated sewage pit cover. We disconnected the piping and removed the old lid. The new sewage pit lid was fabricated in our shop using a new ½” steel plate with access holes for the sewage pumps. New access hole...

Last week, Cox Industrial Services removed a chill water pump that was seized. After the shop work was completed on the pump, we took all the rebuilt parts to the job site. We assembled the split case pump and tested for leaks. After connecting the coupling, the...

Below is a chill water pump that failed to start up. Cox Industrial Services was called out to repair the pump. We disconnected and tested the motor to make sure it was okay. The pump was disassembled and the component parts were transported to our machine shop for...

Last week Cox Industrial Services was called out because of a bad leak on a commercial swimming pool pump. The leak was filling the pump containment area. It had to be repaired quickly because the electric motor was nearly under water. After inspecting the pump, we...

If your pump shaft is beyond economical repair, we can manufacture a new shaft. Recently we had to reverse engineer a broken shaft by taking the dimensions from the old shaft. Making sure all areas were to factory tolerance, which required knowing which bearing and...

Last week we received a call from a customer that had a Nash vacuum pump with a broken shaft. He said that production was down. We told them we could replace the shaft within 2 days. The rotor was delivered to our shop on Thursday and was scheduled for pick up by...

Last week a submersible pump failed at a local building. Cox Industrial Services was called out on an emergency basis because the sump was near overflowing and causing damage to the building. The crew arrived within a few hours and removed the