Cox Industrial services recently was called out to determine why a cooling tower pump had failed. We disassembled the pump and found out that the bearing had deteriorated causing the pump to bind up. We repaired the bearing journals and rebuilt the pump. Here are some...
Cox Industrial services was called out to survey an old booster system in a commercial office building. The existing booster system was so noisy the occupants were complaining. System pressure was too low to provide adequate flow to the roof equipment. They had an old...
A trash pump came in for repair with the pump shaft frozen. After inspection we found that the bearings had failed due to lack of lubrication. We repaired the shaft journal areas and reassembled the pump using new bearings, gaskets, and...
Cox Industrial Services got an emergency call to repair a grinder pump in a problem sewage pit. Due to the emergency nature of the job we determined it would be more economical and faster to replace the pump. The new pump was modified and installed to prevent any...
Cox Industrial services was called in to replace an antiquated booster system at a 240 unit complex. We recommended and installed a new Aquavar booster system with new copper piping. The installation was coordinated so the water services were only interrupted for a...
Cox Industrial Services was called out to replace a deteriorated sewage pit cover. We disconnected the piping and removed the old lid. The new sewage pit lid was fabricated in our shop using a new ½” steel plate with access holes for the sewage pumps. New access hole...
